Chandrayaan 3 Launching Date | Landing Date | Specifications | Payloads | Launching Vehicle | All Other Information

India’s 3rd moon mission Chandrayaan 3

Launching Date

Chandrayaan 3 is India’s third lunar mission, scheduled to launch on 14 July 2023. Learn more about the launch date, payloads, and other specifications of Chandrayaan 3.

Overview

Chandrayaan 3 is India’s third lunar mission, and it is conducted by ISRO (Indian Space Research Organisation).  The mission is set to begin on 14 July 2023 according to a tweet by ISRO. The objective for this mission is to successfully deploy a lander and rover on the lunar surface in the lunar highlands near the South Pole of the moon by August 2023.

Chandrayaan 3 path and launching process

Organisation Involve

ISRO(Indian Space Research Organisation)

Key Objectives

The key objective of the mission is to showcase the complete process of landing and manoeuvring on the lunar surface. According to NASA archives, “Chandrayaan 3 is an ISRO (Indian Space Research Organization) mission with the primary objective of putting a lander and rover in the highlands near the south pole of the Moon in the August 2023 timeframe and demonstrating end-to-end landing and roving capabilities. It will also make a number of scientific measurements on the surface and from orbit.”

What is the Launch Date of Chandrayaan 3?

The ISRO has scheduled the launch for July 14, 2023. The mission will be the first attempt by India to soft-land a spacecraft on the lunar surface since the Chandrayaan 2 mission in 2019.

The mission will begin from Satish Dhawan Space Centre, Sriharikota. ISRO Chairman S. Somanath mentioned to ANI that the date for the launch is set for 13th July and it can go till 19th July. Later, the date was shifted to 14 July. The timing for the launch is set at 2:35 PM IST. The Chandrayaan-3 was taken to Satish Dhawan Space Centre for final assembly. 

Launching Time

India’s third lunar mission, Chandrayaan-3, will lift off from the spaceport in Sriharikota at 2.35pm on July 14 onboard the GSLV-Mk3 or LVM3

Launching Vehicle

GSLV-Mk3 or LVM3

Project Head

ISRO scientist Veeramuthuvel is a native from the Villupuram area of Tamil Nadu, and has risen through the ranks to become the senior scientist in ISRO. The Chandrayaan 3 head currently holds the position of the Project Director of the moon mission

What are the components of Chandrayaan?

Chandrayaan 3 will consist of a Lander Module (LM), a Propulsion Module (PM), and a rover. The LM will be responsible for a soft landing on the lunar surface, while the PM will provide propulsion and attitude control for the entire mission. The rover will be used to explore the lunar surface and collect scientific data.

ISRO states that “Chandrayaan-3 consists of an indigenous Lander module (LM), Propulsion module (PM) and a Rover with an objective of developing and demonstrating new technologies required for Inter planetary missions.” 

What are the Payloads of Chandrayaan 3? 

The ISRO mentions the following payloads: “Lander payloads: Chandra’s Surface Thermophysical Experiment (ChaSTE) to measure the thermal conductivity and temperature; Instrument for Lunar Seismic Activity (ILSA) for measuring the seismicity around the landing site; Langmuir Probe (LP) to estimate the plasma density and its variations. A passive Laser Retroreflector Array from NASA is accommodated for lunar laser ranging studies.”

“Rover payloads: Alpha Particle X-ray Spectrometer (APXS) and Laser Induced Breakdown Spectroscope (LIBS) for deriving the elemental composition in the vicinity of landing site.”

Here are the terms described briefly: 

Lander Payload:

  1. ChaSTE: Chandra’s Surface Thermophysical Experiment. This instrument will measure the thermal conductivity and temperature of the lunar surface.
  2. ILSA: Instrument for Lunar Seismic Activity. This instrument will measure the seismicity of the lunar surface. In its essence, it will measure how much the surface of the moon shakes. 
  3. Langmuir Probe: This instrument will estimate the plasma density and its variations in the lunar ionosphere.
  4. Passive Laser Retroreflector Array: This array will be used for lunar laser ranging studies. It will be used to measure the distance between the Earth and the Moon.

Rover Payloads:

  • Alpha Particle X-ray Spectrometer: This instrument will identify the elemental composition of the lunar surface.
  • Laser Induced Breakdown Spectroscopy: This instrument will identify the chemical composition of the lunar surface.

The mission’s primary goal is to study the lunar surface and to collect data about the moon’s geology and composition. These instruments will help scientists to learn more about the Moon’s composition, its seismicity, and its environment. 

This information will help to better understand the Moon’s history and evolution, and it will also help to identify potential resources that could be used by future human missions to the Moon. 

In conclusion, The launch of Chandrayaan 3 is a major milestone for India’s space program. It is a testament to the hard work and dedication of the ISRO team, and it will help to further our understanding of the moon.

Landing Date

August 23, 2023

Chandrayaan 3 other information

Mission NameChandrayaan-3
Launch SiteSatish Dhawan Space Centre, Sriharikota, Andhra Pradesh
Landing DateAugust 23, 2023 (estimated)
Objectives1. Demonstrate safe landing and roving on the moon’s surface
2. Study lunar regolith’s thermophysical properties
Find More Content Hhttps://blogzeenews.com/

Leave a Comment